Tag

recovery partition

Browsing

Windows 10 allows users to create a bootable USB Recovery Drive that can help you if your PC is giving you troubles. The bootable USB Recovery Drive helps you boot into the Windows Recovery Environment, also known as Limited Diagnostic Mode. Using the Recovery Environment you can do troubleshooting tasks like Repair Startup and other tasks like System Restore, System Refresh or Reset Your PC. This bootable USB Recovery Drive cannot be used to install Windows 10 for that you need to create a bootable Window 10 USB drive.

We recommend creating the recovery drive as soon as possible, before your PC starts giving you trouble. Because in the event of a disaster when you cannot boot into your Windows PC anymore, you are out of luck of recovering it without the Recovery Drive (or Recovery Disc) if you do not have a bootable Windows DVD with you, which is very common if your Windows came pre-installed (Windows 10 OEM) with your PC or Laptop.
You cannot use a Recovery Drive meant for Windows 10 x86 (32-bit) version to fix Windows 10 x64 (64-bit) version and vice versa. Windows 10 Recovery Drive cannot be used to recover any earlier edition of Windows, like Windows 7, Windows 8 or Windows 8.1. The same applies for System Repair Discs.
If Windows is installed on a GPT (not MBR) partition you cannot use System Refresh or Reset Your PC functions until you enable UEFI only boot mode from the BIOS/EFI. Windows 10 does not detect GPT partition alignment correctly if UEFI booting is not enabled.

Requirements For Creating bootable Windows USB Recovery Drive

To create a bootable USB Recovery Drive, we need a USB flash drive with at least 4 GB free space (for 32-bit edition of Windows) or 8 GB free space (for 64-bit Windows edition). If your Windows came pre-installed with your device and it has a custom Recovery Partition, you may need a USB device with up to 32 GB free space on it. If you are going to create a Windows System Recovery Disc, you need a blank CD/DVD. The flash drive you are going to use will be formatted so make sure to backup any data from it before you start following this tutorial.

After creating the bootable USB Recovery drive, do not forget to test it by actually booting into the Windows Recovery Environment. You do not need to do any of the tasks. Before you can boot using the created USB flash drive or CD/DVD, check the boot sequence in your PC’s BIOS/EFI. Make sure you select the USB/CD drive as the first boot device. Also, some devices with a mix of USB 2.0 and USB 3.0 ports can cause issues if you plug in the drive into a USB 3.0 port. Put the drive into a USB 2.0 port and it will work fine.

How To Create A Bootable USB Recovery Drive?

Follow the simple steps described here to successfully create a bootable USB Recovery Drive for Windows. Although written for Windows 10, this guide has been made suitable to create a bootable USB Recovery Drive for Windows 8 / Windows 8.1.

First, connect the USB flash drive you want to use to create your bootable USB recovery drive.

Now, in Windows 10, open Start menu or press Windows Key + S to open Cortana search. Type recovery and from the search results, click on the Create a recovery drive present in the Settings section. When you receive the UAC prompt, click on Yes.

search for recovery

Windows 8/Windows 8.1 users, press Windows Key + W, type recovery into Search box. From the search results, click on the Create a recovery drive option.

You will now see the Create a recovery drive window. Here, keep enabled the option Back up system files to the recovery drive and click on Next to continue. Windows 8/8.1 users should keep the option Copy contents from the recovery partition to the recovery drive enabled before clicking on Next.

Create a recovery drive

Now, in the next step, it should automatically detect the correct drive letter of your USB device in the Select the USB flash drive window. If it has not, click on the correct USB device drive letter and then click Next.

In the next step, the wizard will warn you that all the contents of the selected drive will be deleted. To continue, click on the Create button. Wait for the process to complete. In the final window, it will display a message that says The Recovery drive is ready. Click on Finish to close the window.

If the wizard fails to create the Recovery Drive with the “We can’t create a recovery drive on this PC. Some required files are missing.” error, the winre.wim file or System Reserved partition is missing from your PC. To resolve the issue, follow our next follow-up guide (which will be published next week).

Found this how to article helpful? Do not forget to share it with your friends. Do not forget to post your opinion or comments about this below in the comments section.

Performing any tasks related to hard disk is a daunting task for majority of computer users. All operating systems are equipped with a built-in disk management software that provides basic functions like creating new partitions or deleting existing ones. Microsoft Windows is no exception here. The flagship operating system by Microsoft comes bundled with a Disk Management function accessible from the Computer Management window. It provides very basic functions like create new partition, delete partition, etc. What if you need to do some advance tasks like splitting an existing partition or resizing one? Truly speaking, not everyone wants to invest money to buy some expensive software that they are going to use very less. How about if we tell about a software which does more than what you want and still is free? Here, we are going to review AOMEI Partition Assistant Standard. It’s a freeware hard disk management software for Windows that has some impressive features under its sleeve. Enough of talking, lets dive in to find out how it performs in our tests.

You have just brought a brand new PC or laptop or netbook that came pre-installed with Windows 7 from one of the major manufacturers, viz. Dell, HP, Lenovo, Acer, Toshiba, etc. But the problem that you face when buying from them is you won’t receive any Windows 7 installation media with your purchase. Instead, you will receive either a “recovery disc” (if you’re that much lucky) with your purchase or you’ll have a “recovery partition” built-in your machine.

You may ask what is the problem here, as you can easily recover your Windows 7 or Vista, using the “recovery disk” or “recovery partition.” Well, the problem is, when you use the recovery disks/recovery partition to recover Windows 7 or Vista, it will delete¬†all your files and restore your computer to the state it was in when you first purchased it.